Spacer pad application
Application of pre-punched spacer pads on insulating glass units
Application on back side of insulating glass unit
1.
Automatically controlled application of pre-punched spacer pads on insulating glass units for contact-free stacking
2.
No restrictions on the take-off of insulating glass units thanks to free front surface
3.
Versions with up to five application levels
UNIT'PADAPPLICATOR Type DA-HS

Exact application
- Distances of applied spacer pads:
Horizontal:
infinitely adjustable, minimum distance 100 mm
Vertical:
steady distances of application levels - Engaged quantity of application levels depending on the height of the insulating glass unit
- Registration of the height for each insulating glass unit
- Also suitable for shaped forms
- Convenient and quick insertion of the spacer pad rolls into the applicator unit
Option
- Increased performance thanks to preceding measuring device to automatically pre-set the application levels
References
AURYS, France
#appliances #automation #autopilot #energy efficiency #flat glass tempering #glass tempering #interior #RC Series #reference
“We had an excellent opportunity to replace our two older tempering furnaces with one new Glaston RC Series line to reduce energy consumption, avoid problems with outdated spare parts and beef up our production with more automation,” says Samir Bou Obeid, Chairman of AURYS.
Read moreMid-American Glass, US
#appliances #architectural #automation #FC Series #flat glass tempering #glass tempering #glass tempering process #RC Series #reference
“Maggie gives us outstanding flexibility to temper 3 to 19 mm glass. Louie gives us purpose – to temper the best heat-strengthened and heavy commercial insulated glass,” says Michelle Magyar, President of Mid-American Glass.
Read moreAl-Manna, Saudi Arabia
#architectural #automation #FC Series #flat glass tempering #glass tempering #Jumbo Series #reference #safety glass
“Our aim is to achieve the highest level of perfection with the glass we provide to the booming market in Saudi Arabia,” says Mr. Ibrahim and Mr. Dafeer Manna Al-Amri, who head up Al-Manna Glass in the country’s capital of Riyadh.
Read moreArticles
Energy efficiency best practices in automotive glass production
In this blog, we share some practical tips for optimizing energy consumption in automotive glass production. From preprocessing to final inspection, there is huge...
Read moreStrategies to minimize costs in insulating glass production
Prices for float glass have gone up considerably since the beginning of the energy crisis due to the high energy needed to produce it. As it is the main raw material...
Read moreHow to reduce energy consumption in glass lamination
In our previous blog post, we covered some tips for improving energy efficiency in tempering. This time, let’s turn to glass lamination. Typically, the lamination...
Read more